Volkswagen Golf Service & Repair Manual: Removing and installing fresh air blower control unit -J126-, RHD vehicles

Volkswagen Golf Service & Repair Manual / Heating, air conditioning / Air conditioner / Front heater and air conditioning unit / Removing and installing fresh air blower control unit -J126-, RHD vehicles

Removing

–	Remove baffle plate → Chapter.

–	Disconnect electrical connectors -1- and -4-.

–	Remove bolts -2-.

Risk of burns when touching the hot cooling surface of the fresh air blower control unit. Risk of burns to the hands.Always wear safety gloves.

–	Remove control unit -3- from fresh air blower -V2-.

Installing

Installation is carried out in the reverse order. When installing, note the following:

–	Check operation of fresh air blower -V2-.

Specified torque

→ Chapter „Assembly overview - add-on parts of heater and air conditioning unit and of air intake box“

Removing and installing fresh air blower control unit -J126-, RHD vehicles

Removing and installing fresh air blower control unit -J126-, LHD vehicles

Removing – Remove baffle plate → Chapter. – Dis ...

Removing and installing dust and pollen filter, LHD vehicles

Special tools and workshop equipment required Commercially available vacuum cleaner Cover plate -T10532- ...

Other materials:

Removing and installing A-pillar trim
Special tools and workshop equipment required Removal wedge -3409 Torque wrench -V.A.G 1783 Removing ...

Removing and installing light conductor for front sill panel moulding ambient lighting -W67-/-W68
Note The light conductors for front sill panel moulding ambient lighting -W67-/-W68- are integrated into the sill panel mouldings and cannot be renewed individually. If the light conductor for front sill panel mouldi ...

Dimensions - lettering on rear lid, “GTI/GTD”
Note When fitting the lettering, observe the fitting notes → Anchor. 1 - Lettering Model designation 2 - Height dimension 75.5 ± 1 mm, from lower edge of lettering to tail light. ...