Volkswagen Golf Service & Repair Manual: Removing and installing fresh air blower control unit -J126-, LHD vehicles
– |
Remove baffle plate
→ Chapter. |
|
|
|
– |
Disconnect electrical connectors -1-
and -3-. |
– |
Unscrew bolts -arrows-. |
Risk of burns when touching the hot cooling surface of the fresh air
blower control unit. Risk of burns to the hands.Always wear safety
gloves.
– |
Remove control unit -2- on
fresh air blower -V2-. |
Installation is carried out in the reverse order. When
installing, note the following: |
– |
Check operation of fresh air blower -V2-. |
→ Chapter „Assembly overview - add-on parts of heater and air
conditioning unit and of air intake box“ |
|
|
|
Note
The illustration shows a left-hand drive vehicle. The
removal and installation procedure is identical for both
versions.
Re ...
Removing
–
Remove baffle plate
→ Chapter.
–
Dis ...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Drink holders in the front centre console
→ Drink holders in the rear centre armrest
→ Drink holder in the rear side trim
Bottle holder
Bottle holders are located in the open stowage areas of t ...
Assembly overview - rear side airbag
1 -
Seat bolster
2 -
Electrical wiring
From rear side airbag igniter on driver side -N201-/rear side airbag
igniter on front passenger side -N202-
WARNING
Observe safety instructions for pyrote ...
Damage caused when fitting
Bead core broken during tyre inflation.
Modern radial tyres for passenger cars are mounted only on
safety rims. Safety rims have a hump -1-
running along the bead seat.
1 -&nb ...
© 2016-2024 Copyright www.vwgolf.org