Volkswagen Golf Service & Repair Manual: Removing and installing entry light in exterior mirror
| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1783- |
 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
| If the event of a defective LED, the entry light in exterior
mirror needs to be renewed. |
| – |
Removing and installing mirror trim
→ General body repairs, exterior; Rep. gr.66. |
|
|
|
| – |
Lift driver side entry light in exterior mirror -W52--1-
in direction of arrow -A-. |
| – |
Pull driver side entry light in exterior mirror -W52- in
direction of arrow -B- out of
mirror housing -2-. |
| – |
Press locking mechanism -3- in
direction of arrow -C-. |
| – |
Disconnect electrical connector -2-. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Note
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing turn signal
Tail lights