Volkswagen Golf Service & Repair Manual: Removing and installing engine oil cooler

Volkswagen Golf Service & Repair Manual / 4- cylinder injection engine(1.4 1 direct inction. turbocharger) / Engine lubrication / Engine oil cooler / Removing and installing engine oil cooler

Removing

–	Drain coolant → Chapter.

–	Remove intake manifold → Chapter.

–	Unscrew bolts -arrows- and detach engine oil cooler -1-.

Installing

–	Insert new O-rings.

Installation is carried out in the reverse order; note the following:

–	Install intake manifold → Chapter.

–	Replenish coolant → Anchor.

Specified torques

→ Chapter „Assembly overview - engine oil cooler“

→ Chapter „Assembly overview - ignition system“

Removing and installing engine oil cooler

Assembly overview - engine oil cooler

1 - Engine oil cooler See note → Chapter Removing and installing → Chapter Change coolant af ...

Crankcase breather

...

Other materials:

Maximum permitted gross combination weight
First read and observe the introductory information and safety warnings All data in the official vehicle documents take precedence over these data. All data in this manual apply to the basic German model. The vehicle data sticker in the service schedule and the official vehicle documents sho ...

Removing and installing front passenger side footwell cover
Removing – Remove bolts -1-. – Release front passenger side footwell cover -2- from dash panel and centre console and remove it. Installing Note ...

Removing and installing brake servo, right-hand drive vehicle
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Torque wrench -V.A.G 1410- ...