Volkswagen Golf Service & Repair Manual: Removing and installing emblem with model designation, “R”

Volkswagen Golf Service & Repair Manual / General body repairs, exterior / Exterior equipment / Lettering and emblems / Removing and installing emblem with model designation, “R”

Special tools and workshop equipment required

Torque wrench -V.A.G 1783-

Note

Only remove when radiator grille -3- is removed.

Removing and installing emblem with model designation, “R”

Removing

–	Removing radiator grille → Chapter

–	Unscrew bolt -2- on inner side of radiator grille -3-.

–	Remove “R” emblem -1- from radiator grille -3- towards front.

Installing

Install in the reverse order of removal observing the following:

Specified torques

Component	Specified torques
“R” emblem	2.0 Nm

Removing and installing emblem with model designation, “R-Line”

Special tools and workshop equipment required Torque wrench -V.A.G 1783- ...

Removing and installing emblems at rear

Note The emblem cannot be removed without damage. Removing – Use a screwdriver -3- to carefully lever manufacturer emblem -1- off swivel ...

Other materials:

Removing and installing brake master cylinder, RHD vehicles
Note If there are problems with the brake servo, first check the brake servo vacuum system → Chapter. Special tools and workshop equipment required ...

Removing and installing ignition key withdrawal lock solenoid -N376-
Removing – Remove lower steering column trim → General body repairs, interior; Rep. gr.68. – Release retaining clip -arrow A-, and pull ...

Emptying fuel tank when fuel pump is intact
Special tools and workshop equipment required Removal wedge -3409- Remote control -V.A.G 1348/3A- Test instrument adapter/DSO (5-pin) -VAS 5565- Fuel extractor -VAS 5190- Fuel extractor -VAS 5190 A- for ...