Volkswagen Golf Service & Repair Manual: Removing and installing emblem with model designation, “R-Line”

Volkswagen Golf Service & Repair Manual / General body repairs, exterior / Exterior equipment / Lettering and emblems / Removing and installing emblem with model designation, “R-Line”

Special tools and workshop equipment required

Torque wrench -V.A.G 1783-

Note

Only remove when radiator grille -3- is removed.

Removing and installing emblem with model designation, “R-Line”

Removing

–	Removing radiator grille → Chapter

–	Unscrew bolt -2- on inner side of radiator grille -3-.

–	Remove “R-Line” emblem -1- from radiator grille -3- towards front.

Installing

Install in the reverse order of removal observing the following:

Specified torques

Component	Specified torques
»R Line« emblem	2.0 Nm

Removing and installing model designation on radiator grille

Note The description applies for all emblems. Here the “GTI” emblem is shown as an example. Removin ...

Removing and installing emblem with model designation, “R”

Special tools and workshop equipment required Torque wrench -V.A.G 1783- ...

Other materials:

Moving push button to installation position in the handle
Special tools and workshop equipment required Release tool -T10534- If the push-button was pressed by mistake, the installation position can be restored. ...

Assembly overview - assembly mountings
1 - Bolt Renew Tightening sequence → Fig. 2 - Engine support Specified torque and tightening sequence → Fig. 3 - Engine mounting ...

Overview of the driver side
Fig. 5 Overview of the driver side (left-hand drive vehicles) Fig. 6 Overview of the driver side (right-hand drive vehicles) Key for and : Button for interior monitoring Light switch Daytime running lights or daytime headlights Automatic hea ...