Volkswagen Golf Service & Repair Manual: Removing and installing easy-entry Bowden cable A
– |
Remove front seat
→ Chapter. |
– |
Secure front seat on seat repair stand
→ Chapter. |
– |
Move front seat to highest position. |
– |
Remove seat trim on tunnel side
→ Chapter. |
– |
Turn adjustment knob of backrest adjustment towards front as
far as stop. |
|
|
|
– |
Unclip cable support bracket -1-
of Bowden cable A from backrest. |
– |
Detach Bowden cable A -2- from
fitting on backrest. |
|
|
|
– |
Detach cable support bracket -1-
of Bowden cable A from retainer for entry assistance on seat
pan. |
– |
Unclip retainer -2- for Bowden
cable from seat pan. |
– |
Detach Bowden cable A on seat longitudinal adjustment
-arrow- and remove it. |
Install in reverse order, but note the following: |
– |
Adjust Bowden cable A
→ Chapter. |
|
→ Chapter „Assembly overview - front seat“ |
|
|
|
WARNING
Ensure backrest is locked in position (default
position), otherwise it can tilt forwards in an
uncontrolle ...
Special tools and workshop equipment
required
Feeler gauges -VAS 5301/10-
Adjusting conditions
...
Other materials:
General notes concerning repairs to vehicle electrical system
Caution
When batteries are disconnected and reconnected, the
procedure described in the workshop manual must be
strictly observed.
WARNING
...
Vehicle path display
Fig. 152 Vehicle path display without steering
input (colour display)
Fig. 153 Vehicle path display with steering
input (colour display)
First read and observe the introductory information
and safety warnings
Key
and
Meaning
...
Removing and installing front door trim
Note
Removal and installation are described for the front
door trim on driver side. Follow same instructions for the
front passenger side as appropriate.
Removal and instal ...
© 2016-2024 Copyright www.vwgolf.org