VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing dust and pollen filter, RHD vehicles

Special tools and workshop equipment required
Commercially available vacuum cleaner
Cover plate -T10532-
   
Removal wedge -3409-
Removing
  Note
Handle customer property in the glove compartment with care.
Store any objects from the glove compartment in a sealable plastic bag.
–  Move glove compartment lid to service position → General body repairs, interior; Rep. gr.68.
 

Removing and installing dust and pollen filter, RHD vehicles

–  Release cover -1- in -direction of arrow- and remove it.
 

Removing and installing dust and pollen filter, RHD vehicles

–  Push cover plate -T10532--2- under the pollen filter -1-.
  Note
The illustration shows a left-hand drive vehicle.
 

Removing and installing dust and pollen filter, RHD vehicles

–  Hook cover -1- into dust and pollen filter -2--arrow -.
Risk of damage to fresh air blower caused by dirt dropping out of the dust and pollen filter when the cover plate is not seated properly.Carefully pull out dust and pollen filter.Keep dust and pollen filter covered by cover plate.
–  Pull out cover -1- in -direction of arrow C-.
–  Ensure that cover plate -T10532- is not pulled out as well.
–  Before removing cover plate -T10532-, remove any dirt and leaves using a commercially available vacuum cleaner.
Installing
–  Install in reverse order. Note the following when doing this:
–  Observe installation position of dust and pollen filter when installing.
 

Removing and installing dust and pollen filter, RHD vehicles

Removing and installing dust and pollen filter, LHD vehicles
Special tools and workshop equipment required Commercially available vacuum cleaner Cover plate -T10532- ...

Removing and installing fresh air blower -V2-, LHD vehicles
  Note If only the fresh air blower -V2- is defective, remove and install fresh air blower control unit -J126- → Chapter. ...

Other materials:

Aqua Premium system (painting rims)
Designation: Metallic waterborne base coat -LWG 056 1H7 A1- Issued 04.2013 Product description Instructions for painting rims with metallic waterborne base coat -LWG 056 1H7 ...

Technical data
General repair instructions Repairing electrical wiring harnesses and connectors → Electrical System, General Information; Rep. gr.97 Releasing and dismantling connector housings → Electrical Sys ...

12 V socket
Removing and installing 12 V socket   Caution If excessive force is exerted on sockets without illumination, the retaining sleeve may be damaged. Only illuminated sockets (cigarette lighter) ...

© 2016-2025 Copyright www.vwgolf.org