Volkswagen Golf Service & Repair Manual: Removing and installing door arrester
| Special tools and workshop equipment
required |
|
|
|
 Note
| Removal and installation are only described for the left
door retaining strap. The right side is similar. |
|
|
Torque wrench -V.A.G 1331- |
| – |
Remove rear door trim
→ General body repairs, interior; Rep. gr.70. |
| – |
Pull off self-adhesive cover. |
| |
For models without loudspeaker pull off self-adhesive cover and
remove door retaining strap through opening for loudspeaker
-arrow c-. |
| |
For models with loudspeaker detach inner door cover
→ Chapter and remove through this opening. |
| – |
Unscrew bolt -2- on B-pillar. |
| – |
Remove screws -3- and remove door
retaining strap -1-. |
| Install in reverse order of removal. |
| |
→ Chapter „Assembly overview - door“ |
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
During production, a sealant is applied to the door inner
seals, which are then placed on the door flange and rolled on.
Note
...
Other materials:
Electrical components
some point, you have probably received an electric shock
when touching a metal object. This is due to the electrostatic
charge accumulated by the human body. This charge can cause
malfunctions if you touch the electric steering rack and
steering column c ...
Infrared heater -VAS 6878-
Designation:
Infrared heater -VAS 6878-
Product description:
The infrared heater is used to dry putty, filler, base coat,
top coat and clear coat on vertical or horizontal surfaces.
...
Assembly overview - suspension, multi-link suspension, front-wheel drive
1 -
Wheel bearing housing
Removing and installing
→ Chapter
2 -
Bonded rubber bush
Renewing
→ Chapter.
3 -
Bolt
Specified torque
͛ ...
© 2016-2024 Copyright www.vwgolf.org
Adjusting striker pin
Removing and installing door inner seal