Volkswagen Golf Service & Repair Manual: Removing and installing damper element for glove compartment lid

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Interion equipment / Compartments/covers / Removing and installing damper element for glove compartment lid

Removing

–	Move glove compartment lid to service position → Chapter.

–	Disconnect connector for glove compartment light switch -E26- on damper element -1-.

–	Turn damper element -1- clockwise -arrow- by 90° (¹/₄ turn) and remove it from glove compartment -2-.

Removing and installing damper element for glove compartment lid

–	Move/release rack -1- in -direction of arrow- and remove it from glove compartment lid.

Installing

Note

Before installing, check all fasteners for damage and renew if necessary.

Installation is carried out in reverse order.

Removing and installing damper element for glove compartment lid

Service position for glove compartment lid

Moving to service position – Open glove compartment lid -2-. – Push limit stops -1- for glove comp ...

Removing and installing glove compartment

Special tools and workshop equipment required Torque wrench -V.A.G 1783- ...

Other materials:

Connecting and disconnecting airbag adapter
Special tools and workshop equipment required Airbag adapter -VAS 6282- – Connect airbag adapter -VAS 6282- to side airbag wiring harness -1-. ...

Removing and installing track rod
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Torque wrench -V.A.G 1332- ...

Removing and installing trim for backrest release mechanism
Removing – Pull operating lever -1- upwards -arrow A-. – Insert flat-bladed screwdriver between trim and operating lever as shown in illustration. – Releas ...