VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing covers for auxiliary heater control unit -J364

Volkswagen Golf Service & Repair Manual / Auxiliary heater / Aux. heater/heater booster / Auxiliary heater / Removing and installing covers for auxiliary heater control unit -J364

Removing
–  Switch off electrical consumers.
–  Switch off auxiliary and supplementary heater and switch off ignition.
–  Remove auxiliary heater → Chapter.
–  Dismantle auxiliary heater as far as necessary to gain access to covers for auxiliary heater control unit -J364- → Chapter.
   
–  Detach cable cover -1- from blower housing.
–  Unclip covers for auxiliary heater control unit -J364--2--arrows- to remove.
–  Dismantling heater unit → Chapter.
–  Removing and installing glow plug with flame monitoring -Q8- → Chapter.
–  Remove temperature sensor -G18- and overheating sensor -G189-.
Installing
–  Renew seals.
 

Removing and installing covers for auxiliary heater control unit -J364

–  Check that seals -arrows- are not damaged and are seated correctly.
–  Check sealing surfaces for dirt and damage.
–  Before installing cover, lightly coat seals with coolant.
–  Remaining installation steps are performed in reverse order of removal.
Specified torque
→ Chapter „Assembly overview - auxiliary heater attachments“
 

Removing and installing covers for auxiliary heater control unit -J364

Removing and installing auxiliary heater bracket
Removing –  Switch off electrical consumers. –  Switch off auxiliary and supplementary heater and switch o ...

Removing and installing glow plug with flame monitoring -Q8
Removing –  Dismantling and assembling auxiliary heater → Chapter.     ...

Other materials:

Changing bulbs in xenon headlights
Fig. 235 In the engine compartment: ① cover in left-hand xenon headlight, ② cornering light, ③ turn signal, ④ side light and daytime running light First read and observe the introductory information and safety warningsThe front headlight does not need to be removed when changing bu ...

Working with the air conditioner service station
  Caution If there is evidence to suggest that chemical substances have been added in the vehicle to seal leaks, do not connect the air conditioner service station and do not extract the refrigerant. ...

Removing and installing decoupler pulley with freewheel‏
General description There are different versions of decoupler pulleys with freewheel‏. Before removing the decoupler pulley with freewheel, it must be determined which special tool must be used. ...

© 2016-2024 Copyright www.vwgolf.org