Volkswagen Golf Service & Repair Manual: Removing and installing centre console cover

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Interion equipment / Centre console / Removing and installing centre console cover

Note

Removal and installation is described for the centre console cover on driver side. Follow same instructions for the front passenger side as appropriate.

Special tools and workshop equipment required

Torque wrench -V.A.G 1783

Removing

–	Remove trim for operating and display unit → Chapter.

–	Remove bolt -2-.

–	Initially, remove centre console cover -1- in area of operating and display unit in -direction of arrow A- from centre console -3-.

–	Unclip centre console cover -1- from centre console -3--arrows B- and remove it.

Installing

Note

Before installing, check all fasteners for damage and renew if necessary.

Installation is carried out in reverse order.

Specified torques

→ Chapter „Assembly overview - centre console“

Removing and installing centre console cover

Removing and installing centre console front storage compartment

Removing – Remove trim for operating and display unit → Chapter. – Unclip front storage ...

Removing and installing centre console insert

Special tools and workshop equipment required Torque wrench -V.A.G 1783- ...

Other materials:

Removing and installing drive shaft, right drive shaft, constant velocity joints VL100 and VL107, e-Golf
Special tools and workshop equipment required Torque wrench -V.A.G 1332- Press tool -T10520- ...

2-pack HS Brillant clear coat
Designation: 2-pack HS Brillant clear coat -L2K 769 K04 A5- Issued 10.2010 Product description 2-pack HS Brillant clear coat is a high-gloss, VOC-compliant, high-solid clear ...

Release tools for contacts
The various release tools serve as a means of detaching the different contacts from the contact housings without damage. A selection of release tools is included in wiring harness repair set -VAS 1978- and wiring harness repair set -VAS 1978A- ...