Volkswagen Golf Service & Repair Manual: Removing and installing cap
|
|
|
| – | Remove plugs -3-. |
| – | Insert assembly tool -T10389- approx. 44 mm into the door behind locking hook -2- of the door handle bracket. |
| – | Pull assembly tool -T10389- approx. 5 mm backwards -arrow- until hook is detached. |
| – | Pull door handle off door. |
| – | Pull cover cap -1- out of door handle bracket. |
|
| – | Pull door handle -2- off door. |
| – | Push cover cap -1- into door handle bracket. |
| – | Insert flat-bladed screwdriver -4- approx. 40 mm into door handle bracket until locking hook -3- is reached. |
| – | Press cap -1- onto door. |
| – | Push screwdriver approx. 5 mm into hole -arrow- until hook locks in place. |
| – | Insert plug -5-. |
Removing and installing striker pin
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
Removing and installing door handle
Note
Removal and installation are described only for the right
door handle. The right side is similar.
Removing
...
Other materials:
Assembly overview - transverse link, multi-link suspension, four-wheel drive
1 -
Washer
2 -
Nut
Renew after removing
3 -
Upper transverse link
Removing and installing
→ Chapter
4 -
Washer
5 -
B ...
Removing and installing tensioner for poly V-belt, vehicles with air
conditioner compressor
Removing
–
Remove poly V-belt from tensioner
→ Chapter „Removing and installing poly V-belt, vehicles with
air conditioner compressor“.
–
...
Safety precautions when working on vehicles with high-voltage system
Risk of death due to high voltage
The high voltage system carries high voltage. Electrical shocks will
cause serious injuries or death.
–
People having electronic medical devices for life support or health
maintenance in or on their bodies are pro ...
