Volkswagen Golf Service & Repair Manual: Removing and installing camshaft control valve 1 -N205- and exhaust camshaft
control valve 1 -N318-
Note
On engines with codes CMBA, CPVA, CXSA, CZCA and CPVB, only
camshaft control valve 1 -N205- is installed. |
Inlet camshaft control valve 1 -N205- |
– |
Disconnect electrical connector -1-. |
|
|
|
– |
Unscrew bolt -2- and remove
camshaft control valve 1 -N205-. |
Exhaust camshaft control valve 1 -N318- |
– |
Disconnect electrical connector -3-. |
– |
Unscrew bolt -4- and remove
exhaust camshaft control valve 1 -N318-. |
Installation is carried out in the reverse order; note the
following: |
→ Chapter „Assembly overview - camshaft housing, engine codes
CHPA, CMBA, CPVA, CXSA, CZCA, CPVB, CZDA“ |
→ Chapter „Assembly overview - camshaft housing, engine codes
CPTA, CZEA“ |
|
|
|
1 -
Inlet valve
Do not rework. Only lapping in is permitted.
Valve dimensions
→ Chapter
Checking valve guid ...
Special tools for removing and installing the camshaft
adjuster of exhaust camshaft
Special tools and workshop equipment
required
...
Other materials:
2-pack surfacer
Designation:
2-pack surfacer -LLS MAX 202 M2-, medium grey
Issued 03.2013
Product description
The 2-pack surfacer -LLS MAX 202 M2-, medium grey, is a
high-grade two-pack HS s ...
Removing and installing glove compartment opener
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removing
–
Open glove compartment.
–
Unscrew bolt ...
Cleaning and caring for natural leather covers
First read and observe the introductory information
and safety warnings Please contact a Volkswagen dealership or other qualified
workshop if you have any questions on cleaning and caring for the leather equipment
in your vehicle.
Care and use
Natural leather is sensitive and requires reg ...
© 2016-2024 Copyright www.vwgolf.org