Volkswagen Golf Service & Repair Manual: Removing and installing bulb for number plate light -X4-/-X5-
 Note
| If an LED number plate light is faulty, the entire number
plate light must be renewed. |
| – |
Switch off ignition and all electrical consumers. |
| – |
If ignition key is present, disengage in position 0
(locked). |
| – |
Remove number plate light
→ Chapter. |
|
|
|
| – |
Turn bulb holder -1- in
-direction of arrow- to unlock,
then pull it out of number plate light. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
Note
If an LED number plate light is faulty, the entire number
plate light must be renewed.
Removing
– ...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Warning and indicator lamps
→ Electronic parking brake
→ Parking
→ Information on the brakes
→ Brake support systems
→ Switching TCS or TCS with ESC on and off ...
Operating ParkPilot
Fig. 148 ParkPilot ultrasound sensors around
the vehicle, A: in the front bumper, B: in the rear bumper
Fig. 149 In the lower section of the centre
console: button for switching the ParkPilot on and off
First read and observe the introductory information
and safety warnings The ParkPilot ...
Blender
Designation:
Blender -LVE 013 100 A2-
Issued 10.2012
Product description
Blender was developed to guarantee easy blending-in of
2-pack clear coats and top coats.
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing number plate light -X4-/-X5-