Volkswagen Golf Service & Repair Manual: Removing and installing bulb for front interior light -W1- with incandescent
bulbs
Special tools and workshop equipment
required |
|
|
|
– |
Lever off lens of front interior light -W1- at points marked
with -arrows- using removal wedge
-3409-. |
|
|
|
– |
Pull bulb -1- out of bulb
holder in direction of arrow -A-. |
Install in the reverse order of removal, observing the
following: |
Caution
Risk of damage to the bulb. |
Do not touch the glass part of the bulb with bare
fingers. Fingers leave traces of grease on the glass
bulb, which vaporise when the bulb is switched on and
cause the glass bulb to cloud over. |
Wear, for example, clean fabric gloves when
inserting bulbs. |
|
|
|
|
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Other materials:
Vibration, vibration control system
Using the vibration control system -VAS 6230 A- you can
perform more functions than just stationary balancing.
A special feature of this system is the testing of the
radial force of the wheel and tyre while rolling.
A ro ...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamp
→ Information on changing bulbs
→ Changing bulbs in the halogen headlights
→ Changing bulbs in xenon headlights
→ Changing bulbs in the front bumper
→ Changing bulbs ...
Removing and installing rear underbody cover – e-Golf
Removing
–
Remove bolts -2-.
–
Unscrew nuts -3-.
–
Remove underbody cover -1-.
Installing
Install analogously in reverse order, but note the following:
Specified torque
...
© 2016-2024 Copyright www.vwgolf.org