Volkswagen Golf Service & Repair Manual: Removing and installing brake caliper PC57
Special tools and workshop equipment
required |
|
|
|
Piston resetting appliance -T10145- |
– |
Press piston out of brake caliper using compressed air. |
|
|
|
Place a piece of wood in the recess to prevent damage to the
piston. |
|
|
|
– |
Remove seal using wedge 3409. |
When removing ensure that the surface of the cylinder is not
damaged. |
– |
The surfaces of the piston and seal must be cleaned only
with methylated spirits and then dried. |
– |
Apply a thin coat of assembly paste G 052 150 A2 to piston
and seal before inserting. |
– |
Insert seal in brake caliper. |
|
|
|
– |
Place protective cap with outer sealing lip on piston. |
|
|
|
– |
Insert inner sealing lip into groove in cylinder using wedge
3409. |
When doing this, hold piston in front of brake caliper. |
|
|
|
– |
Press piston into brake caliper using piston resetting
appliance. |
The outer sealing lip on the protective cap will then slip
into the piston groove. |
|
|
|
When carrying out repairs, install all parts supplied in repair kit.
Use only methylated spirits for cleaning the brake.
Apply thin coat of assembly paste G&nb ...
Other materials:
Assembly overview - bench seat / individual seats
1 -
Rear bench seat
Allocation
→ Electronic Parts Catalogue
Removing and installing
→ Chapter
2 -
Guide
For ISOFIX child seat anchor
Qty. 4
Removing and installing
→ Chapter
...
Overview - multifunction steering wheel
1 -
Tiptronic switch in steering wheel to shift down -E439-
Removing and installing
→ Chapter.
2 -
3-spoke steering wheel
3 -
Tiptronic switch in steering wheel to shift up -E438-
...
Removing and installing fuse holder B -SB-
Removing
–
With ignition switched off, disconnect earth cable from
battery
→ Chapter.
–
Press release tabs -arrow- and
detach cover -1- ...
© 2016-2024 Copyright www.vwgolf.org