Volkswagen Golf Service & Repair Manual: Removing and installing bracket for parking aid control unit -J446-/park
assist steering control unit -J791-, LHD vehicles
| Special tools and workshop equipment
required |
| – |
If fitted, remove parking aid control unit/park assist
steering control unit
→ Chapter. |
|
|
|
| – |
To release the fasteners, insert a feeler gauge (0.9 mm)
-2- behind the opening
-arrow-, as shown in illustration. |
| – |
Remove bracket -1- downwards
from bracket for onboard supply control unit
-3-. |
| Installation is carried out in the reverse sequence. |
|
|
|
Removing
–
Remove bracket for onboard supply control unit -J519-
→ Chapter.
–
Remove on ...
Removing
–
Remove C-pillar trim
→ General body repairs, interior; Rep. gr.70.
...
Other materials:
Locking and unlocking the vehicle from the outside
Fig. 27 Buttons on the vehicle key
Fig. 28 Vehicle key with alarm button
First read and observe the introductory information
and safety warnings
Function
Buttons to be used on the vehicle key or
Unlocking the vehicle.
Press the b ...
Cleaning leatherette upholstery
First read and observe the introductory information
and safety warnings Please observe the following notes prior to cleaning
the leatherette upholstery .
Only use water and neutral detergents to clean the leatherette upholstery.
NOTICE
Do not use solvents, wax polish, shoe cream, spot ...
Necessity of wheel alignment, multi-link suspension
Wheel alignment is necessary if:
The vehicle does not handle properly.
Vehicle has been involved in an accident and components have
been renewed.
Axle components are removed or renewed. ...
© 2016-2024 Copyright www.vwgolf.org
Renewing bracket for onboard supply control unit -J519-, LHD vehicles
Removing and installing engine sound generator control unit -J943-, vehicles
with active sound, Golf GTD