Volkswagen Golf Service & Repair Manual: Removing and installing Bowden cable B for entry assistance

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Seat frames / Front seats / Removing and installing Bowden cable B for entry assistance

Removing

–	Remove front seat → Chapter.

–	Secure front seat on seat repair stand → Chapter.

–	Move front seat to highest position.

–	Remove seat trim on tunnel side → Chapter.

–	Turn adjustment knob of backrest adjustment towards front as far as stop.

–	Detach cable support bracket -2- of Bowden cable B from retainer for entry assistance on seat pan.

–	Detach eye -1- of Bowden cable B for entry assistance from pin of seat longitudinal adjustment.

Removing and installing Bowden cable B for entry assistance

–	Detach cable support bracket -1- of Bowden cable B from backrest fitting. To do this, release catch -arrow-.

–	Detach eye -2- of Bowden cable B for entry assistance from pin of backrest fitting using a screwdriver and remove it.

Installing

Installation is carried out in reverse order.

Specified torques

→ Chapter „Assembly overview - front seat“

Removing and installing Bowden cable B for entry assistance

Adjusting Bowden cable A for entry assistance

Special tools and workshop equipment required Feeler gauges -VAS 5301/10- Adjusting conditions ...

Removing and installing memory block

Removing – Move front seat to rearmost and highest position. – Release backrest and fold it towards fron ...

Other materials:

Removing and installing centre console front storage compartment
Removing – Remove trim for operating and display unit → Chapter. – Unclip front storage compartment -1- from centre console -2--arrows A-. – Remo ...

Assembly overview - control units, RHD vehicles
1 - Bracket For onboard supply control unit -J519- Removing and installing → Chapter 2 - Onboard supply control unit -J519- Removing and installing → Chapter ...

Removing and installing centre console trim in footwell
Note Removal and installation is described for the centre console trim in footwell on driver side. Follow same instructions for the front passenger side as appropriate. Special tools and workshop equipment required ...