Volkswagen Golf Service & Repair Manual: Removing and installing Blind Spot Monitor control unit J1086/J1087
– |
Disconnect electrical connector -2-. |
– |
Unscrew nut -1- and bolts
-4- for bracket. |
|
|
|
– |
Remove Blind Spot Monitor control unit -J1086-/-J1087-
together with bracket -1-. |
– |
Remove Blind Spot Monitor control unit -J1086-/-J1087--2-
from bracket -1-. |
Install in the reverse order of removal, observing the
following: |
Note
Normally, the Blind Spot Monitor is calibrated dynamically
(automatically). |
Static calibration is only necessary if entries have been
recorded in the event memory. |
→ Chapter „Assembly overview – Blind Spot Monitor (Blind Spot
Detection)“ |
|
|
|
1 -
Blind Spot Monitor warning lamp in left exterior mirror -K303-
Removing and installing
→ Chapter
2 -
Blind Spo ...
Note
The vehicle shown in the illustration may differ from the actual
vehicle.
1 -
Volkswagen logo
Laser pointer aligned to cent ...
Other materials:
Vehicle settings menu
First read and observe the introductory information
and safety warnings
Opening the Vehicle settings menu
Switch on the ignition.
If necessary, switch on the infotainment system.
Press the
infotainment
button.
Touch the function button
to open ...
Acoustic and optical ParkPilot signals
Fig. 150 ParkPilot display of the area
around the vehicle (colour)
Fig. 151 Mini ParkPilot display of the
area around the vehicle (colour)
First read and observe the introductory information
and safety warnings
Key
and
Meaning
...
Removing and installing door opener illumination bulb -L108-/-L109-
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way (mirror image of left side).
Removing
–
Remove front ...
© 2016-2024 Copyright www.vwgolf.org