Volkswagen Golf Service & Repair Manual: Removing and installing backrest heating element -Z7-/-Z9-
| If the backrest padding in a vehicle with seat heating is
renewed, then the respective backrest heating element must also
be renewed. |
|
|
|
| – |
Separate backrest cover from backrest padding
→ Chapter. |
| – |
Cut through wire -3- right at
old seat heating element -2-. |
 Note
| The old seat heating elements remain fitted on the seat
padding -1- and the new heating
elements are bonded in onto the old ones. |
| Install in reverse order, but note the following: |
| – |
Thread wire -3- through cable
guide. |
| – |
Align new heating elements on backrest padding. Do not pull
off the protective films for this. |
| – |
Pull protective films off heating elements one after the
other. Ensure to not damage the heating elements. |
| – |
Bond in new heating elements so that they coincide with the
old ones and are free of creases. |
| – |
Place connections of the individual heating elements on
bottom of recesses. |
| |
→ Chapter „Assembly overview - cover and padding for backrest“ |
| |
→ Chapter „Assembly overview - seat heating element“ |
| |
→ Chapter „Assembly overview - front backrest“ |
| |
→ Chapter „Assembly overview - front seat“ |
|
|
|
Removing
If the seat padding in a vehicle with seat heating is
renewed, then the respective seat heating element must also be
renewed.
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing seat heating element -Z6-/-Z8-