VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-, LHD vehicles

Volkswagen Golf Service & Repair Manual / Heating, air conditioning / Air conditioner / Front heater and air conditioning unit / Removing and installing auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-, LHD vehicles

Removing
–  Remove driver side knee airbag → General body repairs, interior; Rep. gr.69.
–  Remove left centre console trim in footwell → General body repairs, interior; Rep. gr.68.
Pyrotechnic components may trigger unintentionally.Risk of injury.Discharge any static charge accumulated in your body by briefly touching striker plate for door.
   
–  Loosen nut -3- and remove earth wire -4-.
Risk of burns on metal surfaces of auxiliary air heater element. The heater elements may become very hot.Risk of burns to the skin.Always wear safety gloves.Never touch the metal surfaces of the heater element.
–  Separate electrical connector -2- by sliding locking element -5- upwards and pressing catch inwards.
–  Unscrew bolts -arrows-.
–  Pull auxiliary air heater element -Z35- with auxiliary air heater control unit -J604--1- towards left out of heater and air conditioning unit -6-.
Installing
  Note
Ensure that the earth wire is in proper position and bolted on correctly.
Install in reverse order.
Specified torques
→ Chapter „Assembly overview - heater and air conditioning unit“
 

Removing and installing auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-, LHD vehicles

Checking auxiliary air heater element - Z35- with auxiliary air heater control unit - J604-, RHD vehicles
Checking Special tools and workshop equipment required Vehicle diagnostic tester with current probe 100 A -VAS 505 ...

Removing and installing auxiliary air heater element - Z35- with auxiliary air heater control unit - J604-, RHD vehicles
Removing –  Remove centre console → General body repairs, interior; Rep. gr.68. –  R ...

Other materials:

Removing and installing shock absorber, multi-link suspension, right shock absorber
Special tools and workshop equipment required Torque wrench -V.A.G 1332- Torque wrench -V.A.G 1410- Spring compressor -V.A.G 1752/1- Spring retainer -V.A.G 1752/3A- Adapter -V.A.G 1752/9-, not illu ...

Checking and adjusting selector lever cable
Brief description Selector lever cable must be removed from gearbox so that its ease of movement can be checked. Put removed end down so it does not rub against anything. The selector lever must be moved and then the cab ...

2-pack HS clear coat
Designation: 2-pack HS clear coat -L2K 769 500 A5- Issued 10.2012 Product description 2-pack HS clear coat is a VOC compliant, high-grade high-solid clear coat. ...

© 2016-2024 Copyright www.vwgolf.org