Volkswagen Golf Service & Repair Manual: Removing and installing automatic anti-dazzle interior mirror, with rain and
light sensor -G397- and front camera for driver assist systems -R242-
– |
Unclip front cover -1- from
front interior light -W1- and pull it downwards by approx. 10 mm
-arrows A-. |
– |
Release locking lugs -3- using
as small screwdriver. |
– |
Pull front cover -1- towards
front off front interior light -W1- and retaining plate
-arrow B- and remove it. |
– |
Remove rear cover -2- towards
rear. |
|
|
|
– |
Turn interior mirror -2-
anti-clockwise by 20° -arrow- using
a 13 mm open-end spanner -3- and
remove it downwards off retaining plate
-1-. |
– |
Disconnect connector from interior mirror. |
Note
Before installing, check all fasteners for damage and renew
if necessary. |
Installation is carried out in reverse order. |
|
|
|
Removing
–
Swing interior mirror downwards by approx. 25° as far as
stop.
–
Pull rear cover -2- d ...
Materials
Glass-metal adhesive kit “D 000 703 A1”
Special tools and workshop equipment
required
...
Other materials:
Battery
Battery - general notes
Note
All instructions and notes regarding this chapter are
available under
→ Electrical System, General Information; Rep. gr.27.
...
Displays
Fig. 13 A: bonnet open, B: tailgate open,
C: front left door open, D: right rear door open (only in four-door vehicles)
First read and observe the introductory information
and safety warnings The types of information displayed in the instrument
cluster vary according to the vehicle ...
Removing and installing alternator, vehicles with TDI engine
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1783-
Remov ...
© 2016-2024 Copyright www.vwgolf.org