Volkswagen Golf Service & Repair Manual: Removing and installing ambient temperature sensor -G17-

Volkswagen Golf Service & Repair Manual / Heating, air conditioning / Air conditioner / Other controlling and regulating components / Removing and installing ambient temperature sensor -G17-

Removing

–	Remove radiator grille → General body repairs, exterior; Rep. gr.66.

–	Remove ambient temperature sensor -G17--1- from bracket -arrow-.

–	Remove ambient temperature sensor -G17- upwards.

–	Disconnect electrical connector.

Installing

Note

Ensure electrical wiring connector is properly seated to prevent ingress of water (spray water).

–	Install in reverse order.

Specified torque

Assembly overview - radiator grille → General body repairs, exterior; Rep. gr.66.

Removing and installing ambient temperature sensor -G17-

Function of air quality sensor -G238-

The air quality sensor detects noxious substances in the ambient air (primarily petrol and/or diesel fumes). The Climatronic control unit -J255 ...

Removing and installing humidity sender for air conditioning system -G260-

The humidity sender for air conditioning system -G260- and the light/rain sensor -G397- form one component and are installed depending on vehicle equipment. ...

Other materials:

Overview of fitting locations - components not located in passenger compartment, Golf Variant RHD
1 - Exhaust ventilation for passenger compartment Checking → Chapter Removing and installing → Chapter 2 - Humidity sender for air conditioning system -G260- Check v ...

Removing and installing headlight range control motor -V48-/-V49-, LED headlights
Special tools and workshop equipment required Torque screwdriver -VAS 6494- Note Removal and installation are described for the left side. Removal and installa ...

Removing and installing fuel tank flap release button -E319-
Special tools and workshop equipment required Removal wedge -3409- Note The removal and installation procedures are described for LHD vehicles. Removal and ins ...