Volkswagen Golf Service & Repair Manual: Removing and installing activated charcoal filter

Volkswagen Golf Service & Repair Manual / Fuel supply system - Petrol engines / Fuel supply, gas operation / Activated charcoal filter with fuel tank leak detection / Removing and installing activated charcoal filter

Removing

–	Observe safety instructions → Chapter.

–	Observe rules for cleanliness → Chapter.

–	Remove rear right wheel → Running gear, axles, steering; Rep. gr.44.

–	Remove rear right wheel housing liner → General body repairs, exterior; Rep. gr.66.

–	Release and pull off connector -1-.

–	Pull breather lines -2- and -3- off activated charcoal filter.

Removing and installing activated charcoal filter

–	Undo bolt -arrow-.

–	Using a screwdriver, press catch -A- slightly in direction of luggage compartment.

–	Pull activated charcoal filter downwards out of guide bar and remove it.

Installing

Installation is performed in the reverse order of removal. In the process, note the following:

Push on breather lines until they engage audibly.

Specified torques

→ Chapter „Assembly overview - activated charcoal filter system“

Wheel housing liner → General body repairs, exterior; Rep. gr.66

Wheels → Running gear, axles, steering; Rep. gr.44.

Removing and installing activated charcoal filter

Assembly overview - activated charcoal filter system

1 - Connecting hose From air filter to pressure control valve 2 - Hose clips 3 - Pressure regulating v ...

Checking fuel system for leaks

Special tools and workshop equipment required Fuel system tester (so-called smoke tester) -KLI 9210- Adapter hose ...

Other materials:

Fitting the front towing eye
Fig. 246 In the right-hand side of the front bumper: removing the cover Fig. 247 Front bumper, right-hand side: screwing in the towing eye First read and observe the introductory information and safety warningsThe towing eye is screwed into a threaded hole behind a cover on the right of ...

Assembly overview - heater and air conditioning unit, Climatronic
Note There are different designs and makes of heater and air conditioning unit. The individual components of the various heaters and air conditioning units are similar but not identical. The combined fitting of different makes of component ...

Removing and installing centre underbody covers
Note The removal and installation procedures may have to be modified slightly depending on engine fitted. Removing Unclip spreader river -2- and remove centre underbody panels. Installing Installation is carried out in reverse ...