|
|
Item | PR No. | 1KE / 1KV | ||
1 | Brake caliper | FNc-M38 (15”) | ||
2 | Brake pad, thickness | mm | 11 | |
Brake pad, wear limit without backplate | mm | 2 | ||
3 | Brake disc | Diameter in mm | 272 | |
Brake disc, thickness | mm | 10 | ||
Brake disc, wear limit | mm | 8 | ||
4 | Brake caliper, piston | Diameter in mm | 38 |
|
|
Item | PR No. | 1KJ / 1KY | ||
1 | Brake caliper | FNc-M42 (17”) | ||
2 | Brake pad, thickness | mm | 11 | |
Brake pad, wear limit without backplate | mm | 2 | ||
3 | Brake disc | Diameter in mm | 310 | |
Brake disc, thickness | mm | 22 | ||
Brake disc, wear limit | mm | 20 | ||
4 | Brake caliper, piston | Diameter in mm | 42 |
Renewing rear bonded rubber bush for lower suspension link
Special tools and workshop equipment required
Tube for wheel bearing -3345-
Assembly tool -3348-
Thrust plate -VW 401-
Press tool -VW 411-
Press tool -VW 412-
Removing and installing to ...
Removing and installing sill panel moulding, 2-door model
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Bleeding fuel line to metering pump -V54- (filling with fuel)
Note
Air/fuel vapour in the fuel supply to the auxiliary heater
can lead to malfunction when the auxiliary heater is in the
sparking mode. To prevent air/fuel vapour from being drawn in by
the metering pump -V54- and conveyed to the auxili ...