First read and observe the introductory information and safety warnings
For factory-fitted radio and navigation devices, the aerial for radio reception can be installed in various locations in the vehicle:
Aerials on the interior of the windows can be identified by thin wires.
NOTICE
Aerials located on the inside of the windows can be damaged by corrosive or acidic detergents, any other chemicals or if hard objects chafe against the window. Never apply stickers over the window aerials and never clean the aerials with corrosive or acidic detergents or any other chemicals. NOTICEWhen retrofitting a radio or a navigation system ensure that the vehicle's standard integral aerial amplifier is compatible with the radio or navigation system or else use an additional antenna adapter. Otherwise the aerial amplifier could be subjected to overvoltage damage.
Interference of AM radio reception could occur if electrical devices are used in the vicinity of the aerials in the windows.
Removing and installing dash panel insert trim
Special tools and workshop equipment
required
Removal wedge -3409-
Removing
–
Release locking lever of steering wheel pos ...
EU tyre label, categories
Rolling resistance
→ Anchor
Wet grip
→ Anchor
Noise emissions
→ Anchor
Rolling resistance
Rolli ...
Overview - drive shaft
I -
→ Chapter „Assembly overview - drive shaft, constant velocity joint
VL100“
II -
→ Chapter „Assembly overview - drive shaft, constant velocity joint
VL107“
III -
→ Cha ...