Fig. 132 Pedals in vehicles with a manual gearbox: ① accelerator, ② brake pedal, ③ clutch pedal
Fig. 133 Pedals in vehicles with an automatic gearbox: ① accelerator, ② brake pedal
First read and observe the introductory information and safety warningsThe operation and freedom of movement of all pedals must never be impaired by objects or floor mats.
Only use floor mats that leave the pedal area free and can be securely fastened in the footwell.
If a brake circuit fails, you will have to depress the brake pedal further than normal in order to bring the vehicle to a stop.
WARNING
Objects in the driver footwell can hinder pedal operation. This can lead to loss of control of the vehicle and increase the risk of serious injury.NOTICE
The pedals must be freely operable at all times. For example, the braking distance to fully stop the vehicle will be longer if a braking circuit is faulty. The brake pedal will have to be depressed further and harder than normal.Separating backrest cover from backrest padding
Note
Removal and installation is described for the left seat.
Apply the same instructions for removal and installation of
right seat components as appropriate.
Special tools and workshop equipment
required
...
Infrared heater -VAS 6874
Designation:
Infrared heater -VAS 6874-
Product description:
The infrared heater is used to dry putty, filler, base coat,
top coat and clear coat on vertical surfaces with 2 timers for
flashi ...
Removing and installing washer fluid reservoir
Special tools and workshop equipment
required
Drip tray
Note
Removal and installation of washer fluid reservoirs with
headlight washer system are described. Removal and installation
of washer f ...