Fig. 158 Parking space detected. A: parallel parking, B: perpendicular parking
Fig. 159 In the lower section of the centre console: button for switching on the Park Assist system manually
First read and observe the introductory information and safety warningsPreparation for parking
Parking
Interrupting or automatically stopping the parking procedure
The Park Assist system will stop the parking procedure if the following happens:
The Park Assist system has system-related limitations. For example, the Park Assist system cannot help you to park the vehicle on tight bends.
When parking parallel to the road, a warning signal can be heard to tell the driver to switch between driving forwards and reversing because the change of direction should not take place in the permanent tone area of the ParkPilot.
The progress bar in the instrument cluster display will symbolically indicate the relative distance remaining.
If the Park Assist system turns the steering wheel when the vehicle is stationary, the symbol appears as well. Depress the brake pedal so that the steering movement takes place with the vehicle stationary, keeping the required number of parking movements to a minimum.
If the parking result worsens after a wheel is changed, the system will first have to synchronise itself with the new wheel. The synchronisation procedure is carried out automatically while the vehicle is in motion. You can support this process by driving slowly (less than 20 km/h (12 mph)) through a bend, e.g. in an empty car park.
Repairing steering rack
1 -
Right track rod ball joint
Marked with “A”
→ Anchor
Removing and installing
→ Chapter
Installation position
→ Anchor
Allocation
→ Electro ...
Distribution of the refrigerant circuit components and their influence on
the high-pressure and low-pressure sides
On the high-pressure side, there are the condenser, the
receiver and the restrictor or expansion valve that acts as the
separation between the high-pressure fluid and low-pressure
fluid sides.
High pressure is created because the restric ...
Assembly overview – repair kit for headlight housing, LED headlights only
1 -
Headlight
Removing and installing
→ Chapter
2 -
Inner retaining tab
Removing and installing
→ Chapter
3 -
Bolt
Qty. 2
...