Parking
IntroductionLoosening and tightening threaded connections of drive shaft
Special tools and workshop equipment
required
Socket, 24 mm -T10361A-
Angle wrench -V.A.G 1756 A-
...
Assembly overview - sump and oil pump
Note
Metal shavings or a large quantity of small metal particles found
during engine repair could indicate that the crankshaft bearings or
conrod bearings are damaged. To avoid any subsequent damage, the
following work must be carried out following the repair: Caref ...
Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...