Volkswagen Golf Service & Repair Manual: Paintwork structure
- Paintwork structure of factory finish, cathodic dip primer
- Structure of factory finish, surfacer
- Structure of factory finish, base coat
- Structure of factory finish, clear coat
Sanding
Avoid sanding through to substrate
–
It is recommended to carefully sand the marked area by hand
to avoid “sanding through” the cat ...
Paintwork structure of factory finish, cathodic dip primer
Cathodic dip primer, 2-door version
-
Electrophoretic finish
Cathodic dip primer, 4-door
...
Other materials:
Charging totally discharged batteries with battery charger -VAS 5900-
WARNING
Danger of injury! Observe warning notices and safety
regulations
→ Chapter!
WARNING
It is not permissible ...
Assembly overview - FS III front brake
Note
After every brake pad change, depress brake pedal firmly several
times with vehicle stationary, so that brake pads are properly seated in
their normal operating position.
Use the brake filling and bleeding equipment -VAS 5234- to draw off
brake ...
Distribution of the refrigerant circuit components and their influence on
the high-pressure and low-pressure sides
On the high-pressure side, there are the condenser, the
receiver and the restrictor or expansion valve that acts as the
separation between the high-pressure fluid and low-pressure
fluid sides.
High pressure is created because the restric ...
