Volkswagen Golf Service & Repair Manual: Paint thickness tester -VAS 6197
Paint thickness tester -VAS 6197- |
Fully electronic paint thickness tester with 2 independently
functioning probes and liquid crystal display. Measurements are
possible on various metallic substrates. For example, all
non-magnetic layers on steel or iron and all isolating layers on
non-ferrous metals such as aluminium and copper. Calibration is
not necessary due to the use of Hall sensor technology. |
Measuring range: 0 to 5000 µm for both sensors |
|
|
|
Designation:
Paint thickness tester -VAS 6272-
Product description
The paint thickness tester VAS 6272 ...
Designation:
Paint thickness tester -VAS 5278-
Product description
The paint thickness tester allows pr ...
Other materials:
Assembly overview - speed sensor on front axle
1 -
ABS speed sensor
Before inserting sensor, clean inner surface of fitting hole and
coat it with high-temperature paste -G 052 112 A3-.
Removing and installing
→ Chapter
2 -
Bolt
...
Assembly overview - flanging tool
The flanging tool for brake lines -VAS 6056- can be used to
flange brake lines with an outer pipe diameter of 5 mm without
damaging the coating. In certain cases, this allows sections of
brake lines to be renewed at less expense.
N ...
Adjusting the
head restraints
Fig. 46 Adjusting front head restraint
Fig. 47 Adjusting rear head restraint
First read and observe the introductory information
and safety warnings Every seat is fitted with a head restraint. The centre
rear head restraint is designed solely for use with the centre rear seat. This head ...
© 2016-2024 Copyright www.vwgolf.org