Fig. 4 Overview of the controls in the driver door (left-hand drive vehicles) The controls are mirrored for right-hand drive vehicles
Key for :
Switch for adjusting the exterior mirrors
Buttons for operating the electric windows
Seam seals, middle body
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid damage or faulty operation, brush seam seals smooth
near attachments which must be attached.
...
Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Removing and installing sealing flange on gearbox side
Special tools and workshop equipment
required
Flared ring spanner tool insert AF 24 -V.A.G 1332/11-
Depth gauge -VAS 6082-
...