1 - | Trim for radar sensor |
2 - | Adaptive cruise control unit -J428- |
Removing and installing → Chapter |
Calibrating → Chapter |
3 - | Bolt |
Qty. 2 |
Specified torque: 8 Nm |
4 - | Adaptive cruise control button -E357- |
Integrated in multifunction steering wheel |
Removing and installing → Communication; Rep. gr.91. |
5 - | Dash panel insert -KX2- |
With control unit in dash panel insert -J285-. |
Removing and installing → Chapter |
6 - | Front bumper carrier |
7 - | Quick-release fastener |
Qty. 3 |
Renew |
8 - | Retaining plate |
Removing and installing → Chapter |
9 - | Adjustment screw |
Serves as a pivot |
If adjustment is completed, stud setting must not be changed anymore. |
Measure adjustment and adjust if necessary → Anchor |
10 - | Adjustment screw |
For adjusting adaptive cruise control unit -J428- |
Qty. 2 |
Measure adjustment and adjust if necessary → Anchor |
11 - | Fastener |
Must always be renewed if studs → Item and → Item were unscrewed. |
Renewing → Anchor |
12 - | Electrical connector |
Air conditioning system pressure switch -F129
This pressure switch has 3 functions:
1. Switches radiator fan to next higher speed when pressure
increases in refrigerant circuit (approx. 16 bar).
2. Switches the air conditioning system off in the event of
excess ...
Removing and installing mounting plate with retaining strap
Special tools and workshop equipment
required
Removal wedge -3409
Torque wrench -V.A.G 1783-
Removing
...
Checking a battery with colour indicator
WARNING
Danger of injury! Observe warning notices and safety
regulations
→ Chapter!
Carry out procedure in sequence as follows:
1.
...