Volkswagen Golf Service & Repair Manual: Other control components
- Removing and installing ambient temperature sensor -G17
- Removing and installing remote control receiver for auxiliary coolant heater -R149-, Golf and Golf GTE
- Removing and installing remote control receiver for auxiliary coolant heater -R149-, Golf Variant
- Functional description of remote control for auxiliary and supplementary heater
Switching off auxiliary and supplementary heater
If the button instant heat button has been pressed, or after
the preset operating time has expired or the coolant has reached
a temperature of 88° C, the combus ...
Removing and installing ambient temperature sensor -G17
Note
The ambient temperature sensor -G17- is used for determining
the outside temperature and as a switch-on condition of the
auxiliary and supplementa ...
Other materials:
Warning and indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Engine oil level is too low.
Switch off the engine. Check the engine oil level
.
...
Gaskets, seals
After removing gaskets and seals, always inspect contact
surface of housing or shaft for burrs resulting from removal or
for other signs of damage.
Before installing seals, lightly oil outer diameter and
half-fill space between sea ...
Removing and installing window channel
Note
The removal and installation sequence is only for the
left window channel. Removal and installation of the right
window channel are similar.
Do not bend window channe ...
