Fig. 39 In the driver door: buttons for the front and rear electric windows
First read and observe the introductory information and safety warningsButtons in the driver door
Key for :
Opening and closing the windows
Function | Action |
---|---|
Opening | Press the button. |
Closing | Pull the button. |
Stopping the one-touch function | Press or pull the button for the appropriate window again. |
The safety switch disables the electric window buttons in the rear doors. The yellow indicator lamp in the button will light up. |
The electric windows will only function when the ignition is switched on.
The windows can still be operated using the buttons several minutes after the ignition has been switched off, provided that the driver door and front passenger door are not opened. If the vehicle key is removed from the ignition lock and the driver door is opened, all electric windows can be opened or closed by operating and holding the window button in the driver door. After a few seconds, convenience opening/closing is started .
Removing and installing sealing flange on pulley end
Special tools and workshop equipment
required
Flat scraper
Sealant
→ Electronic Parts Catalogue
Removing
–
Remove noise insulation
...
Warning and indicator lamps
First read and observe the introductory information
and safety warnings
Lit up
Possible cause
Solution
Gearbox fault.
Do not drive
on!
Move the selector lever to position P and leave the gearbox
to cool down.
If ...
Assembly overview - flaps and partitions in air distribution housing
Note
The illustration shows a left-hand drive vehicle.
View from front
Note
-Arrow- = Direction of travel
→ Chapter „Assembly overview - heater and ...