Volkswagen Golf Service & Repair Manual: Moving wipers to service position
Caution
| Risk of damaging the bonnet when moving wipers back
into the park position. |
| Do not manoeuvre the vehicle with wiper arms folded
out. |
| The wipers automatically run back to the park
position when the wiper switch is operated or when speed
exceeds 6 km/h. |
|
Caution
| Risk of damage to wiper blades due to freezing. |
| In the event of frost, check if wiper blades are
frozen. |
|
 Note
| If it is necessary for the wiper motor to run during the
working procedure, the bonnet must be closed completely, as
otherwise the power supply to the wiper motor will be
interrupted. |
| – |
Switch on ignition briefly, then switch it off again. |
| – |
Press windscreen wiper lever to “flick wipe” position within
10 seconds. |
| Windscreen wipers are in “service position”. |
|
|
|
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Wiper motor
...
Removing
–
Move wipers to service position
→ Chapter.
Caution
...
Other materials:
Secondary locking element
The secondary locking mechanism is a housing catch (second
line locking mechanism) that secures all the wires in one
contact housing. If a secondary locking mechanism is fitted to a
contact housing, this must always be opened or removed using the
appropr ...
Removing and installing turbocharger
Special tools and workshop equipment
required
Engine bung set -VAS 6122-
Hose clip pliers -VAS 6362-
...
Assembly overview - lock carrier, NAR
1 -
Lock carrier with add-on parts
Removing and installing
→ Chapter
Moving to and back from service position
→ Chapter
2 -
Mounting plate
Left and right
3 -
Air guide
...
© 2016-2024 Copyright www.vwgolf.org
Assembly overview – wiper motor and wiper frame
Removing and installing wiper blade