Volkswagen Golf Service & Repair Manual: Mounting tyre

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Wheels, tyres, axle align / Wheels, tyres / Mounting tyre

Ensure that the wheel rim is clean.

–	Insert new tyre valve with -VAS 6459--1-.

–	Unscrew and remove valve insert.

–	Inflate tyre to approx. 3 to 4 bar. The bead of the tyre must slip audibly over the hump of the rim.

–	Screw in valve insert.

–	Check tyre pressure to make sure prescribed pressure has been reached.

–	Balance wheel.

Mounting tyre

Removing tyre from wheel

Tyres which have been filled or sealed using tyre sealant must be drained before removal. Caution ...

Wheel change, protecting wheel centring seat against corrosion

Applies to alloy and steel wheels When changing a wheel, wheel centring seat should be waxed using wax spray to prevent corrosion between wheel centr ...

Other materials:

Removing and installing net partition mounting
Removing – Remove net partition → Chapter. – Remove bolts -2-. – Remove insert -3- and mounting -1- from ...

Removing and installing daytime running light bulb -L174-/-L175-, gas discharge headlights
Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way. The left daytime running light bulb -L174- or right daytime running lig ...

Assembly overview - transverse link, multi-link suspension, front-wheel drive
1 - Nut Renew after removing 2 - Washer 3 - Upper transverse link Removing and installing → Chapter 4 - Bolt Renew after remov ...