Volkswagen Golf Service & Repair Manual: Mounting front seat on seat repair stand
Special tools and workshop equipment
required |
|
|
|
|
|
Torque wrench -V.A.G 1331 |
|
|
Torque wrench -V.A.G 1783 |
|
|
Engine and gearbox support -VAS 6095 |
|
Seat repair stand -VAS 6136- |
– |
Remove front seats
→ Chapter. |
– |
Mount seat repair stand -VAS 6136- on engine and gearbox
support -VAS 6095-. |
– |
Place seat on seat repair stand -VAS 6136-. |
– |
Secure front seat on seat repair stand -VAS 6136-. |
Removal is carried out in reverse order of installation. |
|
→ Chapter „Removing and installing front seat “ |
|
|
|
1 -
Driver seat
Configuration depends on vehicle equipment
Assembly overview - front seat
→ Chapter
Assembly overview - front backrest
→& ...
Other materials:
Release tools for contacts
The various release tools serve as a means of detaching the
different contacts from the contact housings without damage.
A selection of release tools is included in wiring harness
repair set -VAS 1978- and wiring harness repair set -VAS 1978A- ...
Contact surface cleaning set -VAS 6410-
Using contact surface cleaning set -VAS 6410-
The contact surface cleaning set -VAS 6410- allows optimal
repair quality to be achieved in the area of vehicle electrics.
The tools allow performing repair work in the area of the sensor
in wiring harnesses for t ...
Removing and installing inner door handle
The inner door handle is clipped into trim panel.
Note
Removal and installation are described for the trim
panel on driver side. Follow same instructions for the front
passenger side as appropriate.
...
© 2016-2024 Copyright www.vwgolf.org