Volkswagen Golf Service & Repair Manual: Measuring tread depth
Note
The tread depth is measured in the main tread channels. |
Do not measure at the TWIs (Tread Wear Indicators). |
|
|
|
Measure the tread depth in the main tread channel, at the
points where the tyre is worn most heavily. The position of the
TWIs can be seen at various points on the shoulder of the tyre
→ Item. |
A “Δ” or the manufacturer's “logo” may appear in the place
of “TWI”. |
The bars of the TWI have a height of 1.6 mm. This is the
minimum tread depth required by German law. |
Different values may apply in other countries. |
|
|
|
The TWIs must not be included in the measurement. Tread
depth should always be measured at the deepest point of the
tread channel. |
A - |
TWIs in the main tread channels |
B - |
Main tread channels with TWIs -arrows- |
|
|
|
Saw-tooth wear is a stepped wear pattern on the individual
tread blocks → Fig.
that can cause increased tyre noise. The saw tooth is caused by
uneven ...
This is often caused by driving style, but can be the result
of incorrect wheel alignment.
Increased one-side ...
Other materials:
Dismantling and assembling auxiliary heater
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410- (4…20 Nm)
Hose clamps, up to 25 mm -3094-
...
Engine oil specification
First read and observe the introductory information
and safety warnings The engine oil used must correspond exactly to specifications.
The correct engine oil is important for the function and service life of the
engine. A special high quality multigrade oil has been filled at the factory and ...
2-pack spray filler
Designation:
2-pack spray filler -ALN 788 007-
Issued 06/2011
Product description
The 2-pack spray filler -ALN 788 007- is a two-pack spray
filler use in vehicle repai ...
© 2016-2024 Copyright www.vwgolf.org