Volkswagen Golf Service & Repair Manual: Measuring axial play of camshaft

Volkswagen Golf Service & Repair Manual / 4- cylinder injection engine(1.4 1 direct inction. turbocharger) / Engine cylinder head, valve gear / Valve gear / Measuring axial play of camshaft

Special tools and workshop equipment required

Universal dial gauge bracket -VW 387-

Measuring axial play of camshaft

Dial gauge -VAS 6079-

Procedure

–	Remove camshaft housing → Chapter.

Measuring axial play of camshaft

–	Secure dial gauge -VAS 6079- to camshaft housing with universal dial gauge bracket -VW 387- as shown in illustration.

–	Press camshaft against dial gauge by hand.

–	Set dial gauge to “0”.

–	Press camshaft away from dial gauge and read off value:

Axial clearance:

Wear limit: 0.25 mm.

Measuring axial play of camshaft

Removing and installing camshaft adjuster

Special tools for removing and installing the camshaft adjuster of exhaust camshaft Special tools and workshop equipment required ...

Removing and installing inlet camshaft oil seal, pulley end, engine codes CPTA, CHPA, CZEA, CZDA

Special tools and workshop equipment required Assembly tool -T10478 B- Removing ...

Other materials:

Infrared heater -VAS 6877
Designation: Infrared heater -VAS 6877- Product description: The infrared heater is used to dry putty, filler, base coat, top coat and clear coat on vertical or horizontal surfaces. ...

Removing and installing headlight range control unit -J431-/control unit for cornering light and headlight range control -J745-, LHD vehicles
Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester. Removing � ...

Radiator fan control unit -J293
Note Available in various designs, sometimes separately. This control unit switches the magnetic clutch and thus the air conditioner compressor on and off. It controls the radiator fan, an ...