Volkswagen Golf Owners Manual: Locking the front passenger door and rear doors manually
Fig. 210 In the end face of the right-hand door: manual lock covered by a rubber seal
Fig. 211 Manually locking the vehicle with the vehicle key
First read and observe the introductory information
and safety warningsThe front passenger door and the rear doors can be locked manually. This does not activate the anti-theft alarm.
- Open the door.
- Remove the rubber seal from the end face of the door. The seal is marked
by a lock symbol
.
- Fold the key bit out of the vehicle key.
- Insert the key bit into the slot behind the opening and turn clockwise (arrow) on the right door and anticlockwise on the left door.
- Put the rubber seal back in place and close the door fully.
- Ensure that the door is locked.
- If required, repeat the process for the other doors.
- The vehicle should be checked by a qualified workshop as soon as possible.
The doors can be unlocked and opened from the inside by pulling the door release handle. You may have to pull the door release lever twice .
Locking and unlocking the driver door manually
Fig. 209 Door handle on the driver door:
covered lock cylinder
First read and observe the introductory information
and safety warningsIf locked manually, all doors are locked. If unlocked
manu ...
Unlocking the tailgate manually
Fig. 212 In the tailgate: opening the warning
triangle holder
Fig. 213 In the luggage compartment: unlocking
the tailgate
First read and observe the introductory information
and safety warni ...
Other materials:
Checking radial and lateral runout of wheels and tyres, tolerances
Radial and lateral run-out occur when the wheel and tyre do
not run absolutely true.
For technical reasons, 100% true running is not possible.
Therefore, the manufacturers of these components allow a
precisely determined ...
Installing roof reinforcement to body, estate with sliding sunroof
Special tools and workshop equipment
required
Electric cutter -V.A.G 1561A
Scraping blade -V.A.G 1561/20
...
Removing and installing door
Special tools and workshop equipment
required
Door alignment tool -3320-
Universal joint for 3320 -3320/1
Bit for 3320 -3320/2-
Bit for 3320 -3320/3-
Torque wrench -V.A.G 1331-
Socket -3410-
Setting gauge -3371-
...
