Securing child seats with the top tether
LightsRemoving and installing underbody covers – petrol/diesel
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
Removing
–
Remove centre underbody panels
→ Chapter.
–
Release retaining tab and pull out front co ...
Round connector systems
Note
If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using the prescribed tool
→ Chapter.
...
Checking pistons and cylinder bores
Checking piston
–
Using a micrometre, measure approx. 10 mm from the lower
edge, perpendicular to the piston pin axis.
Maximum deviation from nominal dimension: 0.04 mm
...