This chapter contains information on the following subjects:
→ Notes on tow-starting
→ Notes on towing→ Fitting the front towing eye
→ Fitting the rear towing eye→ Driving notes on towing
Observe any legal requirements when towing or tow-starting.
For technical reasons, vehicles with a discharged battery must not be tow-started.
Vehicles with Keyless Access must only be towed with the ignition switched on.
Towing a vehicle when the engine is switched off and the ignition is switched on discharges the vehicle battery. Depending on the vehicle battery charge level, the drop in voltage can be large enough after just a few minutes that electrical consumers in the vehicle will no longer function, e.g. the hazard warning lights. In vehicles with Keyless Access, the steering wheel can lock .
Additional information and warnings:
WARNING
Never tow a vehicle that has no power supply.WARNING
If a vehicle is being towed, the vehicle handling and braking effect will change significantly. Please note the following in order to reduce the risk of an accident or serious injuries:NOTICE
Contact corrosion
Contact corrosion can occur if unsuitable connecting
elements (screws, bolts, nuts, washers, etc.) are used.
For this reason, only connecting elements with a special
surface coating are fitted in the vehicle.
Moreover, c ...
Assembly overview - bumper cover
Note
Minor differences may be encountered in respect of bumper cover,
depending on vehicle model.
1 -
Bumper cover
Material PP/EPDM
Removing and installing
→ Chapter.
2 -
Bolt
Left and ri ...
Seam seals, front body
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid damage or faulty operation, brush seam seals smooth
near attachments which must be attached.
...