This chapter contains information on the following subjects:
→ Handling wheels and tyres  
→ Rims  → New wheels and tyres  
→ Tyre pressure  → Tread depth and wear indicators 
→ Tyre damage  → Spare wheel or temporary spare wheel  
→ Tyre lettering  → Winter tyres  
→ Snow chains  Volkswagen recommends that work on tyres and wheels is carried out by a qualified workshop. They are familiar with the procedure and have the necessary special tools and spare parts and the proper facilities for disposing of the old tyres. Volkswagen recommends using a Volkswagen dealership for this purpose.
Additional information and warnings:
WARNING
For technical reasons, it is not generally possible to use the wheels from other vehicles. This can also apply to wheels of the same vehicle type. Refer to the vehicle documentation and ask a Volkswagen dealership if necessary.
Removing and installing brake pedal
It is not possible to remove the brake pedal separately.
–
To be able to remove it, pedal cluster/mounting bracket
needs to be removed first
→ Chapter.
Note
Removing brake pedal wi ...
Removing and installing wheel bearing unit, multi-link suspension,
front-wheel drive
Special tools and workshop equipment required
Fitting sleeve -3241/4-
Hub grease cap puller -VW 637/2-
Torque wrench -V.A.G 1332-
Tool insert -T10162 A-
Torque wrench -V.A.G 1410-
...
Removing and installing parking aid control unit -J446-, left-hand drive
vehicle
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
→ Vehicle
diagnostic tester.
Removing
â ...