This chapter contains information on the following subjects:
→ Function and operation by the user
The Driver Alert System informs the driver if his or her driving shows signs of tiredness.
Additional information and warnings:

WARNING
The Driver Alert System has been developed for use only while driving on highways and good roads.
If there is a system fault, proceed to a qualified workshop immediately to have the system checked.
Function and operation by the userRemoving and installing air recirculation flap control motor -V113-, RHD
vehicles
Heater and air conditioning system with electric/manual
controls
Special tools and workshop equipment
required
Vehicle diagnostic tester
Note
The control motor has end stops wi ...
Removing and installing heater and air conditioning unit
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331/- (5…50 Nm)
Hose clamps up to 25 mm -3094-
...
Assembly overview - driver side airbag
1 -
Catch
To release, use a Torx screwdriver T25 of approx. 100 mm length
2 -
Steering column electronics control unit -J527-
With airbag coil connector and return ring with slip ring -F138-
Assembly overview
→ Elec ...