VW Golf manuals

Volkswagen Golf Owners Manual: Introduction

This chapter contains information on the following subjects:

 → Displays  

 → Operation  

The traffic sign recognition system can help the driver check the speed limits or overtaking restrictions that currently apply.

The traffic signs and additional information recognised by the system are shown in the instrument cluster display and the infotainment system display (navigation system map display).

Availability:

At the time that this owner's manual went to print, the road sign recognition system was available in the following countries:

Andorra, Austria, Belgium, Czech Republic, Denmark, Germany, Finland, France, Ireland, Italy, Liechtenstein, Luxembourg, Monaco, Netherlands, Norway, Poland, Portugal, San Marino, Spain, Sweden, Switzerland, United Kingdom, Vatican City.

Additional information and warnings:

WARNING

Do not let the extra convenience afforded by the road sign recognition system tempt you into taking any risks when driving – this can cause accidents. The system is not a substitute for the full concentration of the driver.

WARNING

Driving recommendations and traffic symbols displayed by the traffic sign recognition system may differ from the current traffic situation.

NOTICE

Please observe the following points in order to avoid impairing the proper function of the system:

NOTICE

Traffic sign recognition
...

Displays
Fig. 178 In the instrument cluster display: examples of recognised speed limits or overtaking restrictions with accompanying additional signs First read and observe the introductory information ...

Other materials:

Assembly overview - sill panel moulding
  Note The illustration shows the sill panel moulding on the left side. The right-hand side is similar (mirror image of left-hand side). I: sill panel moulding, 4-door model II: sill panel moulding, 2-door model 1 -  Sill ...

Assembly overview - skid plate
  Note The removal and installation procedures may have to be modified slightly depending on engine fitted. 1 -  Underride guard Removing –  Remove bolts -2-, -3- and -4-. –  Pull out noise ...

Vehicles with multilink suspension
The connecting pipe can be cut through at the cutting point in order to renew the centre and rear silencers separately. Cutting point is marked by an indentation on circumference of exhaust pipe. Special tools and ...

© 2016-2024 Copyright www.vwgolf.org