Fig. 32 Next to the driver seat: button for switching off the interior monitoring system and anti-tow alarm
Fig. 33 In the roof console: sensors for the interior monitoring system
First read and observe the introductory information and safety warningsThe interior monitoring system will trigger an alarm if movement is detected inside the vehicle when the vehicle is locked.
The anti-tow alarm will be triggered if the vehicle is lifted.
Switching on the interior monitoring system and anti-tow alarm
Lock the vehicle using the vehicle key. When the anti-theft alarm is switched on, the interior monitoring system and the anti-tow alarm are also active.
When interior monitoring and the anti-tow alarm have been deactivated by pressing the button , these functions can be reactivated by pressing the button again. The yellow indicator lamp goes out.
Switching off the interior monitoring system and anti-tow alarm
The orientation lighting in the button must be lit up when switching the systems off. To switch the orientation lighting on, remove the vehicle key from the ignition lock and open the driver door.
The interior monitoring system and anti-tow alarm should therefore be switched off before the vehicle is locked in any of the following, or similar, situations:
Risk of false alarm
Interior monitoring can only work properly if the vehicle is completely closed. Comply with legal regulations. A false alarm can be triggered in any of the following circumstances:
If doors or the tailgate are still open when the anti-theft alarm is activated, only the anti-theft alarm is activated. Interior monitoring and the anti-tow alarm are not activated until all doors and the tailgate are closed.
Renewal of aerial wiring
A new approach to repair work on aerial wires has been
developed
→ Chapter.
Now connecting wires in different lengths and various
adapter cables are available as replacement parts instead of a
complete aerial wire.
...
General repair notes
Before starting work on the fuel supply system, the
following steps must be performed:
Before starting work, the extraction hose of a switched-on
exhaust gas extraction system must be laid near to the assembly
opening of the fuel t ...
Adhesion promoter
Designation:
Adhesion promoter -LLS MAX 015- for plastics
Issued 10.2012
Product description
The adhesion promoter -LLS MAX 015- is a versatile
single-pack product suitable f ...