First read and observe the introductory information and safety warnings
Lit up | Possible cause | Solution |
---|---|---|
There is a defective bulb in the vehicle's exterior lighting (excluding bend lightinga)) b). | Change the defective bulb. |
Goes out | Possible cause | Solution |
---|---|---|
A trailer turn signal or all trailer lights have stopped working. | Change the defective bulb or check the trailer lights. |
Several warning and indicator lamps will light up briefly as a functional check when the ignition is switched on. They will switch off after a few seconds.
Monitoring of the light bulbs on the trailer
For vehicles with a factory-fitted towing bracket, the vehicle will also monitor certain bulbs on a trailer which has been connected properly via the trailer socket.
If a trailer turn signal or all the trailer lights fail, the indicator lamp in the instrument cluster will go out .
If a turn signal in the trailer fails, the indicator lamp ( or ) in the instrument cluster will flash twice as fast .
WARNING
Failure to observe illuminated warning lamps and text messages can lead to your vehicle breaking down in traffic, and can cause accident and serious injury.NOTICE
Failure to observe illuminated indicator lamps and text messages can lead to your vehicle being damaged.If a light emitting diode (LED) in the tail light cluster fails, a warning is not given. If all LEDs fail, this is indicated by the indicator lamp .
a) A separate display appears in the instrument cluster if there is a bend lighting fault.
b) Displayed in colour on an instrument cluster with colour display.
Assembly overview - dash panel insert
1 -
Electrical connector
For dash panel insert
2 -
Dash panel insert -KX2-
With control unit in dash panel insert -J285-.
Dash panel insert must be renewed if warning lamp LED or
illumination ...
Assembly overview - luggage compartment side trim, estate
Note
The illustration shows the luggage compartment side trim on the
left side. The right-hand side is similar (mirror image of left-hand
side).
1 -
Luggage compartment side trim
Removing and installing
→ Chapter
...
Receiver
The receiver collects the liquid droplets and directs them
in a continuous stream to the expansion valve. Moisture which
has entered the refrigerant circuit during assembly is collected
by the dessicant bag in the receiver.
Note
...