Safety precautions for working on vehicles with auxiliary/supplementary
heater
Identification of Valeo heater and air conditioning unitRemoving and installing B-pillar trim on rear door
Note
Removal and installation are described only for the left side.
Removal and installation of the right side are similar.
Removing
–
Run door window down to bottom position.
–
Pull window channel -3- in area ...
Checking belt guide fittings and latch plates
Plastic-coated fittings show fine, parallel scoring after
stress on belt system (when belt was fastened during accident).
(On the other hand, wear caused by frequent belt use can be
recognized by smooth wear, free of lines.)
–
...
Safety precautions when working on the cooling system
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Always wear safety gloves.
–
Always wear safety goggles.
– ...